3Com S7902E Command Reference Manual - page 602
1-2
Default Level
2: System level
Parameters
None
Description
Use the
reset udp-helper packet
command to clear the statistics of UDP packets forwarded.
Related commands:
display udp-helper server
.
Examples
# Clear the statistics of the forwarded UDP packets.
udp-helper enable
Syntax
udp-helper enable
undo udp-helper enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
udp-helper enable
command to enable UDP Helper. The device enabled with UDP Helper
functions as a relay agent that converts UDP broadcast packets into unicast packets and forwards them
to a specified destination server.
Use the
undo udp-helper enable
command to disable UDP Helper.
By default, UDP Helper is disabled.
Examples
# Enable UDP Helper
[Sysname] udp-helper enable
udp-helper port
Syntax
udp-helper port
{
port-number
|
dns
|
netbios-ds
|
netbios-ns
|
tacacs
|
tftp
|
time
}