- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 1420
of
2327
Go
1-49
timer join-prune (IPv6 PIM view)
Syntax
timer join-prune
interval
undo timer join-prune
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval
: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the
timer join-prune
command to configure the join/prune interval globally.
Use the
undo timer join-prune
command to restore the system default.
By default, the join/prune interval is 60 seconds.
Related commands:
pim ipv6 timer join-prune
.
Examples
# Set the global join/prune interval to 80 seconds.
[Sysname] pim ipv6
[Sysname-pim6] timer join-prune 80