3Com S7902E Command Reference Manual - page 2001
1-10
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
display history-command
Syntax
display history-command
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display history-command
command to display commands saved in the history buffer.
The system will save validated history commands performed last in current user view to the history
buffer, which can save up to ten commands by default. You can use the
history-command max-size
command to set the size of the history buffer. Refer to the
history-command max-size
command in
User Interface Commands
in the
System Volume
for related configuration.
Examples
# Display validated history commands in current user view (the display information varies with
configuration).
display history-command
system-view
vlan 2
quit
display hotkey
Syntax
display hotkey
View
Any view
Default Level
1: Monitor level
Parameters
None