3Com S7902E Command Reference Manual - page 510
1-1
1
DHCP Server Configuration Commands
z
The DHCP server configuration is supported only on VLAN interfaces and loopback interfaces. The
subaddress pool configuration is not supported on loopback interfaces.
z
DHCP snooping must be disabled on the DHCP server.
DHCP Server Configuration Commands
bims-server
Syntax
bims-server ip
ip-address
[
port
port-number
]
sharekey
key
undo bims-server
View
DHCP address pool view
Default Level
2: System level
Parameters
ip ip-address
: Specifies an IP address for the BIMS server.
port port-number
: Specifies a port number for the BIMS server in the range 1 to 65534.
sharekey key
: Specifies a shared key for the BIMS server, which is a string of 1 to 16 characters.
Description
Use the
bims-server
command to specify the IP address, port number, and shared key of the BIMS
server in the DHCP address pool for the client.
Use the
undo bims-server
command to remove the specified BIMS server information.
By default, no BIMS server information is specified.
If you execute the
bims-server
command repeatedly, the latest configuration will overwrite the previous
one.
Related commands:
dhcp server ip-pool
.