- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 2321
1-3
slave switchover { disable | enable }
Syntax
slave
switchover
{
disable
|
enable
}
View
System view
Default Level
2: System level
Parameters
disable
: Disables manual configuration of the switchover between the AMB and SMB.
enable
: Enables manual configuration of the switchover between the AMB and SMB.
Description
Use the
slave
switchover disable
command to disable manual switchover function between the AMB
and SMB.
Use the
slave
switchover enable
command to enable manual switchover function between the AMB
and SMB.
By default, manual configuration of the switchover between the AMB and SMB is enabled.
Related commands:
slave switchover
.
Examples
# Enable manual configuration of the switchover between the AMB and SMB.
[Sysname] slave switchover enable