3Com S7902E Command Reference Manual - page 1538
1-6
Default Level
1: Monitor level
Parameters
all
: Displays all information.
verbose
: Displays detailed information.
vpn-instance-name
: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
interface-type interface-number
: Specifies an interface by its type and number.
|
: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration
in the
System
Volume
.
begin
: Displays all lines starting with the line that matches the regular expression.
exclude
: Displays all lines other than those matching the regular expression..
include
: Displays all lines matching the regular expression.
regular-expression
: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the
display mpls ldp interface
command to display information about LDP-enabled interfaces.
Related commands:
mpls ldp
(system view),
mpls ldp
(interface view).
Examples
# Display information about all LDP-enabled interfaces.
LDP Interface Information in Public Network
------------------------------------------------------------------------
IF-Name Status LAM Transport-Address Hello-Sent/Rcv
------------------------------------------------------------------------
Vlan2 Inactive DU 1.1.1.1 0/0
------------------------------------------------------------------------
LAM: Label Advertisement Mode IF-Name: Interface name
# Display detailed information about all LDP-enabled interfaces.
LDP Interface Information in Public Network
--------------------------------------------------------------------------
Interface Name : Vlan-interface2
LDP ID : 1.1.1.1:0 Transport Address : 1.1.1.1
Entity Status : Inactive Interface MTU : 1500
Configured Hello Timer : 15 Sec
Negotiated Hello Timer : 15 Sec
Configured Keepalive Timer : 45 Sec
Label Advertisement Mode : Downstream Unsolicited
Hello Message Sent/Rcvd : 0/0 (Message Count)
-------------------------------------------------------------------------