3Com S7902E Command Reference Manual - page 2256
1-11
next-hop
Syntax
next-hop
ip-address
undo
next-hop
View
ICMP-echo test type view
Default Level
2: System level
Parameters
ip-address
: IP address of the next hop.
Description
Use the
next-hop
command to configure the next hop IP address for an IP packet.
Use the
undo next-hop
command to remove the configured next hop IP address.
By default, no next hop IP address is configured.
Examples
# Configure the next hop IP address as 10.1.1.1.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
nqa
Syntax
nqaentry admin-name
operation-tag
undo nqa
{
all
|
entry admin-name
operation-tag
}
View
System view
Default Level
2: System level
Parameters
admin-name
: Specifies the name of the administrator who creates the NQA test operation, a string of 1
to 32 characters, with “-” excluded. It is case-insensitive.
operation-tag
: Specifies the tag of a test operation, a string of 1 to 32 characters, with “-” excluded. It is
case-insensitive.
all
: All NQA test groups.