3Com S7902E Command Reference Manual - page 352
2-14
Examples
# Configure the encryption key as
test
.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] encrypt key test
This operation is not supported in current version!
forward-error-correction enable
Syntax
forward-error-correction enable
undo forward-error-correction enable
View
ONU port view
Default Level
2: System level
Parameters
None
Description
Use the
forward-error-correction enable
command to enable forward error correction (FEC) on the
OLT and ONUs.
Use the
undo forward-error-correction enable
command to disable this function.
This function is disabled by default.
Examples
# Enable FEC on the OLT and ONUs.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] forward-error-correction enable
ip address
Syntax
ip address
{
dhcp-alloc | ip-address mask
gateway gateway
}
undo ip address
View
ONU port view
Default Level
2: System level