3Com S7902E Command Reference Manual - page 1855
1-9
Table 1-5 display portal server
command output description
Field
Description
1)
Number of the portal server
aaa
Name of the portal server
IP
IP address of the portal server
Key
Key for portal authentication
Not configured
will be displayed if no key is configured.
Port
Listening port on the portal server
URL
Address the packets are to be redirected to
Not configured
will be displayed if no address is configured.
display portal server statistics
Syntax
display portal server statistics
{
all
|
interface interface-type interface-number
}
View
Any view
Default Level
1: Monitor level
Parameters
all
: Specifies all interfaces.
interface interface-type interface-number
: Specifies an interface by its type and name.
Description
Use the
display portal server statistics
command to display portal server statistics on a specified
interface or all interfaces.
Note that with the
all
keyword specified, the command displays portal server statistics by interface
and therefore statistics about a portal server referenced by more than one interface may be displayed
repeatedly.
Examples
# Display portal server statistics on Vlan-interface 2.
---------------Interface: Vlan-interface2----------------------
Server name: st
Invalid packets: 0
Pkt-Name Total Discard Checkerr
REQ_CHALLENGE 3 0 0
ACK_CHALLENGE 3 0 0
REQ_AUTH 3 0 0