3Com S7902E Command Reference Manual - page 2261
1-16
[Sysname-nqa-admin-test-dhcp] operation interface vlan-interface 2
password (FTP test type view)
Syntax
password
password
undo password
View
FTP test type view
Default Level
2: System level
Parameters
password
: Password used to log onto the FTP server, a string of 1 to 32 characters. It is case sensitive.
Description
Use the
password
command to configure a password used to log onto the FTP server.
Use the
undo password
command to remove the configured password.
By default, no password is configured for logging onto the FTP server.
Related commands:
username
,
operation
.
Examples
# Configure the password used for logging onto the FTP server as
ftpuser
.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password ftpuser
probe count
Syntax
probe count
times
undo probe count
View
Any NQA test type view
Default Level
2: System level
Parameters
times
: Number of probes in an NQA test, in the range 1 to 15.