3Com S7902E Command Reference Manual - page 1122
1-18
Related commands:
reset multicast routing-table
,
display multicast routing-table
,
display
multicast forwarding-table
.
Examples
# Clear the multicast forwarding entries related to multicast group 225.5.4.3 from the multicast
forwarding table of the public instance.
# Clear the multicast forwarding entries related to multicast group 226.1.2.3 from the multicast
forwarding table of VPN instance mvpn.
reset multicast routing-table
Syntax
reset multicast
[
all-instance
|
vpn-instance vpn-instance-name
]
routing-table
{ {
source-address
[
mask
{
mask
|
mask-length
} ] |
group-address
[
mask
{
mask
|
mask-length
} ] |
incoming-interface
{
interface-type interface-number
| register
} } * |
all
}
View
User view
Default Level
2: System level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
source-address
: Multicast source address.
group-address
: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask
: Mask of the multicast group/source address, 255.255.255.255 by default.
mask-length
: Mask length of the multicast group/source address. For a multicast group address, this
argument has an effective value range of 4 to 32; for a multicast source address, this argument has an
effective value range of 0 to 32. The system default is 32 in both cases.
incoming-interface
: Specifies to clear the routing entries of which the incoming interface is the
specified one..
register
: Specifies to clear the routing entries of which the incoming interface is the specified register
interface of PIM-SM..
all
: Specifies to clear all the routing entries from the multicast routing table.
Description
Use the
reset multicast routing-table
command to clear multicast routing entries from the multicast
routing table.
Note that: