3Com S7902E Command Reference Manual - page 1900
1-13
After entering public key view, you can configure the peer public key with the
public-key-code begin
and
public-key-code end
commands. This requires that you obtain the hexadecimal public key from
the peer beforehand.
Related commands:
public-key-code begin
,
public-key-code end
.
Examples
# Enter public key view, specifying a public key name of key1.
[Sysname] public-key peer key1
[Sysname-pkey-public-key]
public-key peer import sshkey
Syntax
public-key peer keyname import
sshkey
filename
undo public-key peer keyname
View
System view
Default Level
2: System level
Parameters
keyname
: Public key name, a string of 1 to 64 characters.
filename
: Public key file name. For detailed information about file name, refer to
File System
Management
in the
System Volume.
Description
Use the
public-key peerimport
sshkey
command to import a peer public key from the public key file.
Use the
undo public-key peer
command to remove the setting.
After execution of this command, the system automatically transforms the public key file in SSH1,
SSH2.0 or OpenSSH format to PKCS format, and imports the peer public key. This requires that you get
a copy of the public key file from the peer through FTP/TFTP.
Examples
# Import a peer public key named key2 from public key file key.pub.
[Sysname] public-key peer key2 import sshkey key.pub
sftp
Syntax
sftp
server
[
port-number
]
[
prefer-ctos-cipher
{
3des
|
aes128
|
des
} |
prefer-ctos-hmac
{
md5
|
md5-96
|
sha1
|
sha1-96
} |
prefer-kex
{
dh-group-exchange
|
dh-group1
|
dh-group14
} |
prefer-stoc-cipher
{
3des
|
aes128
|
des
} |
prefer-stoc-hmac
{
md5
|
md5-96
|
sha1
|
sha1-96
} ] *