- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 629
of
2327
Go
1-21
Description
Use the
dns server ipv6
command to specify a DNS server.
Use the
undo dns server ipv6
command to remove the specified DNS server.
By default, no DNS server is configured.
Examples
# Specify a DNS server at 2002::1.
[Sysname] dns server ipv6 2002::1
ipv6
Syntax
ipv6
undo ipv6
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
ipv6
command to enable IPv6.
Use the
undo ipv6
command to disable IPv6.
By default, IPv6 is disabled.
Examples
# Enable IPv6.
[Sysname] ipv6
ipv6 address
Syntax
ipv6 address
{
ipv6-address prefix-length
|
ipv6-address/prefix-length
}
undo ipv6 address
[
ipv6-address prefix-length
|
ipv6-address/prefix-length
]
View
Interface view