3Com S7902E Command Reference Manual - page 891
1-27
Examples
# Display BGP route flap statistics.
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path/Origin
*> 55.0.0.0 12.1.1.1 2 00:00:16 100?
*d 77.0.0.0 12.1.1.1 5 00:34:02 00:27:08 100?
Table 1-9 display bgp routing flap-info
command output description
Field
Description
From
Source IP address of the route
Flaps
Number of routing flaps
Duration
Duration time of the flap route
Reuse
Reuse time of the route
Refer to
Table 1-6
for description on the other fields above.
display bgp routing-table label
Syntax
display bgp routing-table label
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display bgp routing-table label
command to display labeled BGP routing information.
Examples
# Display labeled BGP routing information.
BGP Local router ID is 6.6.6.7
Status codes: * - valid, > - best, d - damped,