3Com S7902E Command Reference Manual - page 1982
1-21
z
This command is unavailable in the current user interface.
z
This command prompts for confirmation when being executed in any valid user interface.
Examples
# Log into user interface 0 and make terminal services unavailable in VTY 0 through VTY 4.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
% Disable ui-vty0-4 , are you sure ? [Y/N]y
speed
Syntax
speed
speed-value
undo speed
View
AUX interface view
Default Level
2: System level
Parameters
speed-value
: Transmission speed (in bps). This argument can be 300, 600, 1200, 2400, 4800, 9600,
19,200, 38,400, 57,600, 115,200 and defaults to 9,600.
Description
Use the
speed
command to set the transmission speed of the user interface.
Use the
undo speed
command to revert to the default transmission speed.
After you use the
speed
command to configure the transmission speed of the AUX user interface, you
must change the corresponding configuration of the terminal emulation program running on the PC, to
keep the configuration consistent with that on the switch.
Examples
# Set the transmission speed of the AUX user interface to 9600 bps.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 9600