3Com S7902E Command Reference Manual - page 366
2-28
Examples
# Enable auto-negotiation on UNI port 1.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 auto-negotiation
uni description
Syntax
uni uni-number
description text
undo uni uni-number
description
View
ONU port view
Default Level
2: System level
Parameters
uni-number
: UNI number of an ONU, in the range 1 to the number of UNI ports of the current ONU. The
number of UNIs can be up to 80.
text
: String of 1 to 40 characters describing the UNI.
Description
Use the
uni
description
command to configure a description for a UNI.
Use the
undo uni uni-number
description
command to restore the default.
By default, no description is configured for a UNI.
Examples
# Configure the description of UNI 1 as
Test
.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 description Test
uni duplex
Syntax
uni
uni-number duplex
{
full
|
half
|
auto
}
undo uni
uni-number duplex
View
ONU port view