3Com S7902E Command Reference Manual - page 1218
1-6
Field
Description
Counters for MSDP message
MSDP peer statistics:
z
Count of RPF check failure: Number of SA
messages discarded due to RPF check
failure
z
Incoming/outgoing SA messages: Number of
SA messages received and sent
z
Incoming/outgoing SA requests: Number of
SA request received and sent
z
Incoming/outgoing SA responses: Number of
SA responses received and sent
z
Incoming/outgoing data packets: Number of
received and sent SA messages
encapsulated with multicast data
display msdp sa-cache
Syntax
display msdp
[
all-instance
|
vpn-instance vpn-instance-name
]
sa-cache
[
group-address
|
source-address
|
as-number
] *
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
group-address
: Multicast group address in the (S, G) entry, in the range of 224.0.1.0 to
239.255.255.255.
source-address
: Multicast source address in the (S, G) entry.
as-number
: AS number, in the range of 1 to 65535.
Description
Use the
display msdp sa-cache
command to view the information of (S, G) entries in the SA cache.
Note that:
z
If you do not specify all-instance nor vpn-instance, this command will display the information on the
public instance.
z
This command gives the corresponding output only after the
cache-sa-enable
command is
executed.
z
If you do not provide a group address, this command will display the (S, G) entry information for all
multicast groups.
z
If you do not provide a source address, this command will display the (S, G) entry information for all
sources.