3Com S7902E Command Reference Manual - page 1141
1-17
igmp startup-query-count
Syntax
igmp startup-query-count
value
undo igmp startup-query-count
View
Interface view
Default Level
2: System level
Parameters
value
: Startup query count, namely, the number of queries the IGMP querier sends on startup, with an
effective range of 2 to 5.
Description
Use the
igmp startup-query-count
command to configure the startup query count on the current
interface.
Use the
undo igmp startup-query-count
command to restore the system default.
By default, the startup query count is set to the IGMP querier robustness variable.
By default, the IGMP querier robustness variable is 2, so the startup query count is also 2.
Related commands:
startup-query-count
,
igmp robust-count
.
Examples
# Set the startup query count to 3 on VLAN-interface 100.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp startup-query-count 3
igmp startup-query-interval
Syntax
igmp startup-query-interval
interval
undo igmp startup-query-interval
View
Interface view