3Com S7902E Command Reference Manual - page 1705
2-23
qos apply policy
Syntax
qos apply policy policy-name
{
inbound
|
outbound
}
undo qos apply policy
{
inbound
|
outbound
}
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
inbound
: Specifies the inbound direction.
outbound
: Specifies the outbound direction.
policy-name
: Specifies the policy name.
Description
Use the
qos apply policy
command to apply a policy on a port or a port group.
Use the
undo
qos apply policy
command to remove the policy applied on a port or a port group.
Note that, when you apply a policy by using the
qos apply policy
command, whether or not the
inbound
/
outbound
keyword can take effect depends on the actions defined in the traffic behavior and
LPU types, as described in
Table 2-10
.
Table 2-10
The support for the inbound direction and the outbound direction
SC LPU
SA LPU
EA LPU
LPU type
Action
Inbound
Outbound
Inbound
Outbound
Inbound
Outbound
Traffic
accounting
Supported Supported Supported
Not
supported
Supported
Not
supported
TP Supported
Supported
Supported
Not
supported
Supported
Not
supported
Traffic
filtering
Supported Supported Supported
Not
supported
Supported
Not
supported
Traffic
mirroring
Supported Supported Supported
Not
supported
Supported
Not
supported
Configurin
g the outer
VLAN tag
Supported
Not
supported
Supported
Not
supported
Supported
Not
supported
Traffic
redirecting
Supported
Not
supported
Supported
Not
supported
Supported
Not
supported
Remarking
the
customer
network
VLAN ID
for packets
Not
supported
Supported
Not
supported
Not
supported
Not
supported
Not
supported