3Com S7902E Command Reference Manual - page 597
1-19
Default Level
2: System level
Parameters
None
Description
Use the
reset tcp statistics
command to clear statistics of TCP traffic.
Related commands:
display tcp statistics
.
Examples
# Display statistics of TCP traffic.
tcp timer fin-timeout
Syntax
tcp timer fin-timeout
time-value
undo tcp timer fin-timeout
View
System view
Default Level
2: System level
Parameters
time-value
: Length of the TCP finwait timer in seconds, ranging from 76 to 3,600.
Description
Use the
tcp timer fin-timeout
command to configure the length of the TCP finwait timer.
Use the
undo tcp timer fin-timeout
command to restore the default.
By default, the length of the TCP finwait timer is 675 seconds.
Note that the actual length of the finwait timer is determined by the following formula:
Actual length of the finwait timer = (Configured length of the finwait timer – 75) + configured length of the
synwait timer
Related commands:
tcp timer syn-timeout
,
tcp window
.
Examples
# Set the length of the TCP finwait timer to 800 seconds.
[Sysname] tcp timer fin-timeout 800