3Com S7902E Command Reference Manual - page 738
1-6
[Sysname-ospf-100] default cost 10 limit 20000 tag 100 type 2
default-cost (OSPF area view)
Syntax
default-cost
cost
undo default-cost
View
OSPF area view
Default Level
2: System level
Parameters
cost
: Specifies a cost for the default route advertised to the Stub or NSSA area, in the range 0 to
16777214.
Description
Use the
default-cost
command to configure a cost for the default route advertised to the stub or NSSA
area.
Use the
undo default-cost
command to restore the default value.
The cost defaults to 1.
This command is only applicable to the ABR of a stub area or the ABR/ASBR of an NSSA area.
Related commands:
stub
,
nssa
.
Examples
# Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub area
as 20.
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] stub
[Sysname-ospf-100-area-0.0.0.1] default-cost 20
default-route-advertise (OSPF view)
Syntax
default-route-advertise
[ [
always
|
cost
cost
|
type
type
|
route-policy
route-policy-name
] * |
summary cost
cost
]
undo default-route-advertise
View
OSPF view