3Com S7902E Command Reference Manual - page 1299
1-9
igmp-snooping enable
Syntax
igmp-snooping enable
undo igmp-snooping enable
View
VLAN view
Default Level
2: System level
Parameters
None
Description
Use the
igmp-snooping enable
command to enable IGMP Snooping in the current VLAN.
Use the
undo igmp-snooping
enable
command to disable IGMP Snooping in the current VLAN.
By default, IGMP Snooping is disabled in a VLAN.
IGMP Snooping must be enabled globally before it can be enabled in a VLAN.
Related commands:
igmp-snooping
.
Examples
# Enable IGMP Snooping in VLAN 2.
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
igmp-snooping fast-leave
Syntax
igmp-snooping fast-leave
[
vlan
vlan-list
]
undo igmp-snooping fast-leave
[
vlan
vlan-list
]
View
Ethernet interface view, Layer 2 aggregate interface view, port group view
Default Level
2: System level
Parameters
vlan vlan-list
: Defines one or multiple VLANs. You can provide up to 10 VLAN lists, by each of which
you can specify an individual VLAN in the form of
vlan-id
, or a VLAN range in the form of
start-vlan-id
to