3Com S7902E Command Reference Manual - page 224
1-32
Please wait... Done
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer-2 aggregate interface
Bridge-aggregation 1
with the IP subnet-based
VLAN 3. Among the member ports of the aggregation group corresponding to
Bridge-aggregation
1
,GigabitEthernet 2/0/1 is an access port and GigabitEthernet 2/0/2 is a trunk port.
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type access
Please wait... Done.
Configuring GigabitEthernet 2/0/1... Done.
Configuring GigabitEthernet 2/0/2............................. Done.
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
Please wait... Done.
Configuring GigabitEthernet 2/0/1... Done.
Configuring GigabitEthernet 2/0/2... Done.
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3