3Com S7902E Command Reference Manual - page 1978
1-17
Parameters
screen-length
: Number of lines the screen can contain. This argument ranges from 0 to 512 and
defaults to 24.
Description
Use the
screen-length
command to set the number of lines the terminal screen can contain.
Use the
undo screen-length
command to revert to the default number of lines.
You can use the
screen-length
0 command to disable the function to display information in pages.
Examples
# Set the number of lines the terminal screen can contain to 20.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] screen-length 20
send
Syntax
send
{
all
|
number | typenumber
}
View
User view
Default Level
1: Monitor level
Parameters
all
: Specifies to send messages to all user interfaces.
type
: User interface type.
number
: Absolute user interface index or relative user interface index.
z
Relative user interface index: If you provide the
type
argument, the
number
argument indicates the
user interface index of the type. When the type is AUX,
number
is 0; when the type is VTY,
number
ranges from 0 to 4.
z
Absolute user interface index: If you do not provide the
type
argument, the
number
argument
indicates the absolute user interface index, and ranges from 0 to 5.
Description
Use the
send
command to send messages to a specified user interface or all user interfaces.
Examples
# Send messages to all user interfaces.
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello^Z