3Com S7902E Command Reference Manual - page 326
1-16
display onuinfo silent
Syntax
display onuinfo silent
{
interface interface-type interface-number
|
slot slot-number
}
View
Any view
Default Level
2: System level
Parameters
interface
-
type
: Port type, which can be
OLT
.
interface-number
: OLT port number.
slot-number
: ID of the slot where the EPON card is seated.
Description
Use the
display onuinfo silent
command to display the information about all the silent ONUs
connected to the specified OLT port or to the EPON card seated in the specified slot.
Examples
# Display the information about all the silent ONUs connected to the EPON card seated in slot 4.
-------------------------------- Olt4/0/1 ------------------------------
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e276-4b90 0 N/A N/A N/A N/A Silent 266s
-------------------------------- Olt4/0/2 ------------------------------
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e276-4b91 0 N/A N/A N/A N/A Silent 252s
-------------------------------- Olt4/0/3 ------------------------------
Error: The port's state should be up!
-------------------------------- Olt4/0/4 ------------------------------
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e276-4b93 0 N/A N/A N/A N/A Silent 300s
--- 3 entries found ---
# Display the information about all the silent ONUs connected to OLT 4/0/1.
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e276-4b90 0 N/A N/A N/A N/A Silent 243s
--- 1 entry found ---
For the command output description, refer to
Table 1-10
.