3Com S7902E Command Reference Manual - page 2257
1-12
Description
Use the
nqa
command to create an NQA test group and enter NQA test group view.
Use the
undo
nqa
command to remove the test group.
Note that if the test type has been configured for the test group, you will directly enter NQA test type
view when you execute the
nqa
command.
Examples
# Create an NQA test group whose administrator name is
admin
and whose operation tag is
test
and
enter NQA test group view.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
nqa agent enable
Syntax
nqa agent
enable
undo nqa agent enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
nqa agent enable
command to enable the NQA client.
Use the
undo nqa agent enable
command to disable the NQA client and stop all the tests being
performed.
By default, the NQA client is enabled.
Related commands:
nqa server enable
.
Examples
# Enable the NQA client.
[Sysname] nqa agent enable
nqa agent max-concurrent
Syntax
nqa agent max-concurrent
number
undo nqa agent max-concurrent