3Com S7902E Command Reference Manual - page 2007
1-16
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
Welcome to legal (header legal)
Press Y or ENTER to continue, N to exit.
Welcome to motd(header motd)
Welcome to shell(header shell)
hotkey
Syntax
hotkey
{
CTRL_G
|
CTRL_L
|
CTRL_O
|
CTRL_T
|
CTRL_U
}
command
undo hotkey
{
CTRL_G
|
CTRL_L
|
CTRL_O
|
CTRL_T
|
CTRL_U
}
View
System view
Default Level
2: System level
Parameters
CTRL_G
: Assigns the hot key
CTRL_L
: Assigns the hot key
CTRL_O
: Assigns the hot key
CTRL_T
: Assigns the hot key
CTRL_U
: Assigns the hot key
command
: The command line associated with the hot key.
Description
Use the
hotkey
command to assign a hot key to a command line.
Use the
undo hotkey
command to restore the default.
By default, the system specifies corresponding commands for
the others are null.
z
display current-configuration
z
display ip routing-table
z
undo debugging all
You can customize this scheme as needed however.
Examples
# Assign the hot key
display tcp status
command.