3Com S7902E Command Reference Manual - page 369
2-31
View
ONU port view
Default Level
2: System level
Parameters
uni-number
: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
across
: Specifies the cable type to be crossover.
auto
: Specifies to auto-sense the cable type.
normal
: Specifies the cable type to be straight-through.
Description
Use the
uni
mdi
command to set the MDI mode for UNIs.
Use the
undo
uni
uni-number mdi
command to restore the MDI mode for UNIs to the default value.
By default, the MDI mode for UNIs is
auto
, that is, the UNIs of the ONU can recognize the cable type
automatically.
This command takes effect on H3C ONUs only.
Examples
# Set the MDI mode of UNI 1 to
auto
.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 mdi auto
uni multicast vlan
Syntax
uni
uni-number multicast vlan
{
vlan-id
}
&
undo
uni-number
multicast vlan
{ {
vlan-id
}
&
|
all
}
View
ONU port view
Default Level
2: System level