3Com S7902E Command Reference Manual - page 751
1-19
link-state-id
: Link state ID, in the IP address format.
originate-router
advertising-router-id
: Displays information about LSAs originated by the specified
router.
self-originate
: Displays information about self-originated LSAs.
Description
Use the
display ospf lsdb
command to display LSDB information.
If no OSPF process is specified, LSDB information of all OSPF processes is displayed.
Examples
# Display OSPF LSDB information.
OSPF Process 1 with Router ID 192.168.0.1
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 192.168.0.2 192.168.0.2 474 36 80000004 0
Router 192.168.0.1 192.168.0.1 21 36 80000009 0
Network 192.168.0.1 192.168.0.1 321 32 80000003 0
Sum-Net 192.168.1.0 192.168.0.1 321 28 80000002 1
Sum-Net 192.168.2.0 192.168.0.2 474 28 80000002 1
Area: 0.0.0.1
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 192.168.0.1 192.168.0.1 21 36 80000005 0
Sum-Net 192.168.2.0 192.168.0.1 321 28 80000002 2
Sum-Net 192.168.0.0 192.168.0.1 321 28 80000002 1
Table 1-7 display ospf lsdb
command output description
Field
Description
Area
LSDB information of the area
Type LSA
type
LinkState ID
Linkstate ID
AdvRouter
The router that advertised the LSA
Age
Age of the LSA
Len
Length of the LSA
Sequence
Sequence number of the LSA
Metric
Cost of the LSA
# Display Type2 LSA (Network LSA) information in the LSDB.
OSPF Process 1 with Router ID 192.168.1.1
Area: 0.0.0.0