3Com S7902E Command Reference Manual - page 1225
1-13
Examples
# Configure the router with the IP address of 125.10.7.6 as the MSDP peer of the local router, with
interface VLAN-interface 100 as the local connection port.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface vlan-interface 100
peer description
Syntax
peer peer-address description
text
undo peer peer-address description
View
Public instance MSDP view, VPN instance MSDP view
Default Level
2: System level
Parameters
peer-address
: MSDP peer address.
text
: Descriptive string of 1 to 80 case sensitive characters including spaces.
Description
Use the
peer description
command to configure the description information for the specified MSDP
peer.
Use the
undo peer description
command to delete the configured description information of the
specified MSDP peer.
By default, an MSDP peer has no description information.
Related commands:
display msdp peer-status
.
Examples
# In the public instance, add the descriptive text “Router CstmrA” for the router with the IP address of
125.10.7.6 to indicate that this router is Customer A.
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description Router CstmrA
peer mesh-group
Syntax
peer peer-address mesh-group
name
undo peer peer-address mesh-group