3Com S7902E Command Reference Manual - page 548
2-13
Parameters
all
: Displays the Option 82 configuration information of all interfaces.
interface
interface-type
interface-number
: Displays the Option 82 configuration information of a
specified interface.
Description
Use the
display dhcp relay information
command to display Option 82 configuration information on
the DHCP relay agent.
Examples
# Display the Option 82 configuration information of all interfaces.
Interface: Vlan-interface100
Status: Enable
Strategy: Replace
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: abaci
User defined:
Circuit ID: company001
Interface: Vlan-interface200
Status: Enable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Remote ID: device001
display dhcp relay security
Syntax
display dhcp relay security
[
ip-address
|
dynamic
|
static
]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address
: Displays the binding information of an IP address.
dynamic
: Displays information about dynamic bindings.
static
: Displays information about static bindings.