3Com S7902E Command Reference Manual - page 375
2-37
View
ONU port view
Default Level
2: System level
Parameters
uni-number
: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the
uni shutdown
command to disable the UNIs.
Use the
undo
uni shutdown
command to enable the UNIs.
By default, all the UNIs are disabled.
Examples
# Disable UNI 1.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 shutdown
uni speed
Syntax
uni uni-number
speed
{
10
|
100
|
auto
}
undo uni uni-number
speed
View
ONU port view
Default Level
2: System level
Parameters
uni-number
: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
10
: Specifies the port speed to 10 Mbps.
100
: Specifies the port speed to 100 Mbps.
auto
: Specifies the port speed to be auto-negotiated.
Description
Use the
uni
uni-number speed
command to set the operating speed for a UNI.
Use the
undo uni uni-number
speed
command to restore the default operating speed for a UNI.
By default, the operating speed of a UNI port is 100Mbps.