3Com S7902E Command Reference Manual - page 910
1-46
[Sysname-bgp-vpn1] peer test connect-interface loopback 0
peer default-route-advertise (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name
|
ip-address
}
default-route-advertise
[
route-policy route-policy-name
]
undo peer
{
group-name
|
ip-address
}
default-route-advertise
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.
ip-address
: IP address of a peer.
route-policy-name
: Routing policy name, a string of 1 to 19 characters.
Description
Use the
peer default-route-advertise
command to advertise a default route to a peer/peer group.
Use the
undo peer default-route-advertise
command to disable default route advertisement to a
peer/peer group.
By default, no default route is advertised to a peer/peer group.
With this command used, the router unconditionally sends a default route with the next hop being itself
to the peer/peer group regardless of whether the default route is available in the routing table.
Examples
# In BGP view, advertise a default route to peer group
test
.
[Sysname] bgp 100
[Sysname-bgp] peer test default-route-advertise
# In BGP-VPN instance view, advertise a default route to peer group
test
(the VPN has been created).
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test default-route-advertise
peer description (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name
|
ip-address
}
description
description-text
undo peer
{
group-name
|
ip-address
}
description