3Com S7902E Command Reference Manual - page 980
1-21
Field
Description
DB Description
Database description packet
Ls Req
Link state request packet
Ls Upd
Link state update packet
Ls Ack
Link state acknowledgement packet
Discarded Discarded
packet
display ospfv3 topology
Syntax
display ospfv3
[
process-id
]
topology
[
area
area-id
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: Displays the topology information of an OSPFv3 process; The process ID ranges from 1 to
65535.
area
: Displays the topology information of the specified area.
area-id
: ID of an area, a decimal integer (in the range of 0 to 4294967295) that is translated into IPv4
address format by the system or an IPv4 address.
Description
Use the
display ospfv3 topology
command to display OSPFv3 topology information. If no process is
specified, topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index) Bits Metric Next-Hop Interface
Rtr 1.1.1.1 --
Rtr 2.2.2.2 1 2.2.2.2 Vlan100
Table 1-17
display ospfv3 topology
command output description
Field
Description
Type
Type of node
ID(If-Index) Router
ID
Bits Flag
bit