3Com S7902E Command Reference Manual - Ip Routing Table Commands
1-1
1
IP Routing Table Commands
z
The term “router” in this document refers to a router in a generic sense or a Layer 3 switch.
z
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
IP Routing Table Commands
display ip routing-table
Syntax
display ip routing-table
[
vpn-instance vpn-instance-name
] [
verbose
|
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-instance vpn-instance-name
: Displays routing table information for a VPN instance. The
vpn-instance-name
argument represents the instance name and is a string of 1 to 31 case-sensitive
characters.
verbose
: Displays detailed routing table information, including that for inactive routes. With this
keyword absent, the command displays only brief information about active routes.
|
: Uses a regular expression to filter output information. For details about regular expressions, refer to
the section
CLI Display
in
Basic System Configuration
in the
System Volume
.
begin
: Displays route entries starting from the one specified by the regular expression.
exclude
: Displays route entries not matching the regular expression.
include
: Displays route entries matching the regular expression.
regular-expression
: Regular expression, a string of 1 to 256 case-sensitive characters used for
specifying routing entries.
Description
Use the
display ip routing-table
command to display brief information about active routes in the
routing table.